Furuno FELCOM 250 Manual do Utilizador descarregar pdf (Página 43)

3. SETTING AFTER INSTALLATION

3.5 Serial Port Setting

Set for the equipment that is connected to the RS-232C port.

1. Click Serial port in the Basic settings sub menu.

2. Select a baud rate from the Baud rate drop-down list. The selections are 9600, 19200, 38400,

57600 and 115200 bps.

3. Set a parity bit in the Parity box. The selections are None, Even and Odd.

4. Select the Flow control among Hardware, Software and None.

5. Click the Apply button to complete the setting.

Serial port

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 65 66

Installation Manual 1
INMARSAT FLEETBROADBAND 1
FELCOM 250/FELCOM 500 1
A : AUG 2009 2
H : FEB . 18, 2011 2
Pub. No. IME-56660-H 2
(YOSH ) FELCOM500/250 2
SAFETY INSTRUCTIONS 3
SYSTEM CONFIGURATION 4
EQUIPMENT LISTS 5
1. HOW TO INSTALL THE UNIT 7
MICROWAVE RADIATION ! 8
NO ADMITTANCE WITHIN 1.40 m 8
NO ADMITTANCE WITHIN 0.7 m 9
Pressure 10
(Above figure: FELCOM 500) 10
FELCOM 500 11
FELCOM 250 11
Procedure 12
1. HOW TO INSTALL THE UNIT 13
Name Type Code no. Qty 17
1.2 Communication Unit 18
1.3 IP Handset 19
(0.59") 20
90±0.5 (3.54") 20
120 (4.72") 20
132±0.5 (5.20") 21
144 (5.67") 21
127±1 (5.00") 21
Fixing plate (left) 22
Fixing plate (right) 22
Six places 22
Facsimile 22
How to change modem settings 23
Mounting location 23
How to mount 24
Remove plastic sheet and 25
2. CONNECTIONS 26
2.2 Antenna Cable 27
2. CONNECTIONS 28
12DSFA-CF as follows 29
2.3 Communication Unit 30
TTYCS-1 Cable fabrication 31
NMEA signal, External alarm 31
Cable fixture 32
Never connect as follows: 33
How to inset the grommet 34
Unit to affix 35
2.6 LAN Cable Fabrication 36
3. SETTING AFTER INSTALLATION 37
Administrator Login 38
Basic settings 39
Settings 39
3.2 GPS Setting 40
3.3 Analog Port Setting 41
Incoming Indicator 42
3.5 Serial Port Setting 43
3.6 Satellite Setting 44
3.7 OTA Setting 45
3.8 Handset Setting 46
Setting in the IP handset 47
APPENDIX 1 JIS CABLE GUIDE 50
㧼㧭㧯㧷㧵㧺㧳ޓ㧸㧵㧿㨀 51
+056#..#6+10/#6'4+#.5 52
Modular jack box 55
8/Mar/10 R.Esumi 57
11/Dec/09 R.Esumi 58
17/May/2010 TAKAHASHI 59
11/May/09 R.Esumi 61
18/Feb/09 R.Esumi 62
Y. Hatai 64
T.Matsuguchi 65
Y.NISHIYAMA 66

Comentários a estes Manuais

Sem comentários

Furuno FELCOM 250 Manual do Utilizador Página 43

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Furuno FELCOM 250